WPC Facade Profile
Creative

Are you looking for a Facade system that is durable, weather-resistant and easy to maintain? Then CREATIVE is what you are looking for. The solid rhombus strip made of our quality wood composite material is used as a Facade system for new and existing buildings. In combination with appropriate thermal insulation, the rhombus strip is used as a suspended, rear-ventilated system. The Facade strip, which is available in three different sizes, can be laid both horizontally and vertically. For designing the corners, you can cut the Facade profile flexibly to mitre at any angle or use the modern Facade corner made of stainless steel, which is quick and easy to install and forms a shockproof transition to the strip.

Special Features
of Creative

  • Noble look by patented, individual wood grain
  • Attractive and economic at the same time
  • Efficiency: easy to clean and extremely low-maintenance
  • Sustainable: in case of removal, material is completely recyclable
  • Flexible: horizontal and also vertical layable
  • Special colours available with extra charge

Colour Variants
of the WPC facade profil

The colors range from the brown shades of oak, amber and chestnut to graphite grey.

Special Colours

Creative is available in the following special colours from 30 square metres:

Technical Data
of the facade profile

TOTAL HEIGHT

small: 70 mm, xl: 103 mm, xxl: 152 mm

COVERED WIDTH

small: 66 mm, xl: 99 mm, xxl: 148 mm

THICKNESS

small: ca. 17 mm, xl: ca. 17 mm, xxl: ca. 17 mm

SURFACE

with wooden grain, finely brushed

SPECIAL COLOURS

from 30 m2 per special colour available

Standard lenghts

ca. 4 m / ca. 6 m (special lenghts at extra charge)

REQUIREMENTS PER SQUARE METER

small: ca. 15 metres, xl: ca. 10 metres, xxl: ca. 6.8 metres

WEIGHT

small: 1.15 kg/m, xl 1.9 kg/m, xxl 2.8 kg/m

Pictures and Videos

Laying

For the installation of one square metre Facade you require:

small: ca. 15 m Rhombus strips and ca. 27 brackets
xl: ca. 10 m Rhombus strips and ca. 18 brackets
xxl: ca. 6.8 m Rhombus strips and ca. 12 brackets

The number of start/end bracket depends on the number of sub-constructions lath.

Corner Joints

For the design of the corners with mitre cuts, the strips are cut strictly according to measure in the angle.

Using our easy-to-mount stainless steel corners you can achieve an optically clean and elegant transition to the strips. This solution means that you can save material, too (ca. 5 cm per strip), as well as have a robust corner option.

Complete Set

Use our WPC complete set! We offer different ways of laying and care for your application. Various sub-constructions, mounting and decorative façade corners and borders offer you a great deal of creative freedom.

Made-To-Measure

We produce your individual requests exactly in the right length. This saves you money because you don’t have to cut your length requirements out of the standard lengths. The ordered length has an oversize of +0 to 3 cm due to the production process.

  • Less offcuts
  • Quicker laying
  • Accessories package suitable for construction sites
  • At least ten pieces of deck per individual length/color/model
  • Commission reference

Care and Cleaning

It’s important for us, that you don’t have to invest much time or work concerning our products. That’s why they are particularly easy to care for and weatherproof. In contrast to conventional wooden decks, our decks do not have to be oiled or painted and still do not splinter or crack. The cleaning is done completely uncomplicated with water. This gives you plenty of time to relax on your favourite spot.

Property References

Menu